Roline UD.6L0202D1275A02 User Manual Download Page 70

Page: 70 / 176

User M anual of Network Video Recorder

6.1

Playing Back Record Files

6.1.1

Playing Back by Channel

Purpose:

Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported.



OPTION 1:

Choose a channel in live view mode using the mouse and click the

button in the quick setting toolbar.

In the instant playback mode, only record files recorded during the last five minutes on this channel will be

played back.

Figure 6. 1

Instant Playback Interface



OPTION 2:

Enter the Playback interface.

Right-click on the live view window, and the live view toolbar appears at the top of the screen. Then click

the icon

on the live view toolbar to enter the Playback interface.

Under multi-screen live view mode, the recorded files of the top -left channel will be played back.

Pressing numerical buttons will switch playback to the corresponding channels during playback process.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in

Figure 6. 2.

Summary of Contents for UD.6L0202D1275A02

















































































































































































Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands

Roline UD.6L0202D1275A02, User Manual

Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands