Roline UD.6L0202D1275A02 User Manual Download Page 102

Page: 102 / 176

User M anual of Network Video Recorder

102

copy an arming schedule to other days.

Figure 8. 6

Set Arming Schedule of Alarm Input

If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.

Set PTZ linking parameters and click

to complete the settings of the alarm input.

Please check whether the PTZ or speed dome supports PTZ linkage.

One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and

patterns are exclusive.

Figure 8. 7

Set PTZ Linking of Alarm Input

If you want to set handling action of another alarm input, repeat the above steps or just copy the above

settings to it.

Summary of Contents for UD.6L0202D1275A02

















































































































































































Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands

Roline UD.6L0202D1275A02, User Manual

Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands