Roline UD.6L0202D1275A02, User Manual

Page: 32 / 176

User M anual of Network Video Recorder
32
Figure 2. 22 Protocol Management Interface
2. There are 16 customized protocols provided in the system, you can edit the protocol name; and choose
whether to enable the sub-stream.
Before customizing the protocol for the network camera, you have to contact the manufacturer of the
network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream.
Example: The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. E.g.,
rtsp://192.168.1.55:554/ch1/main/av_stream.
Protocol Name: Edit the name for the custom protocol.
Enable S ubstream: If the network camera does not support sub-stream or the sub-stream is not needed,
leave the checkbox empty.
Type: The network camera adopting custom protocol must support getting stream through standard RTSP.
Transfer Protocol: Select the transfer protocol for the custom protocol.
Port: Set the port number for the custom protocol.
Path: Set the resource path for the custom protocol. E.g., ch1/main/av_stream.
3. Click Apply to save the settings and click OK exit.
4. Choose the protocol type of transmission and choose the transfer protocols.
The protocol type and the transfer protocols must be supported by the connected network camera.
After adding the customized p rotocols, you can see the protocol name is listed in the dropdown list, please refer
to Figure 2. 23.