Roline UD.6L0202D1275A02 User Manual Download Page 72

Page: 72 / 176

User M anual of Network Video Recorder

Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate

special frames.

6.1.2

Playing Back by Time

Purpose:

Play back video files recorded in specified time duration. M ulti-channel simultaneous playback and channel switch

are supported.

Steps:

Enter playback interface.

M enu>Playback

Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar.

Figure 6. 4

Playback Calendar

If there are record files for that camera in that day, in the calendar, the icon for that day is displayed as

Otherwise it is displayed as

In the Playback interface:

The toolbar in the bottom part of Playback interface can be used to cont rol playing process, as shown in Figure 6.

Summary of Contents for UD.6L0202D1275A02

















































































































































































Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands

Roline UD.6L0202D1275A02, User Manual

Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands