Roline UD.6L0202D1275A02, User Manual

Page: 165 / 176

User M anual of Network Video Recorder
165
3. Enter the information for new user, including User Name , Password , Level and
User’s MAC Address
.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
•
Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration.
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration.
User’s MAC Address: The M AC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this M AC address to access the NVR.
4. Click the OK button to save the settings and go back to the User M anagement interface. The added new user
will be displayed on the list, as shown in Figure 13. 6.
Figure 13. 6 Added User Listed in User Management Interface
5. Select the user from the list and then click the button to enter the Permission settings interface, as
shown in Figure 13. 7.
Figure 13. 7 User Permission Settings Interface
6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of NVR.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Camera M anagement: The adding, deleting and editing of IP cameras.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),
upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown Reboot: Shutting down or rebooting the NVR.
Remote Configuration
•
Remote Log Search: Remotely viewing logs that are saved on the NVR.
•
Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters