Roline UD.6L0202D1275A02 User Manual Download Page 85

Page: 85 / 176

User M anual of Network Video Recorder

6.2.3

Digital Zoom

Steps:

Click the

button on the playback control bar to enter Digital Zoom interface.

Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times.

Figure 6. 26

Draw Area for Digital Zoom

Right-click the image to exit the digital zoom interface.

6.2.4

Reverse Playback of Multi-channel

Purpose:

You can play back record files of multi-channel reversely. Up to 8-ch (with 4CIF resolution) simultaneous reverse

playback is supported; up to 4-ch (with 720P resolution) simultaneous reverse playback is supported, up to 2-ch

(with 1080P resolution) and up to 1-ch (with 5M P resolution) reverse playback is supported.

Steps:

Enter Playback interface.

M enu>Playback

Check more than one checkboxes to select multiple channels and click t o select a date on the calendar.

Summary of Contents for UD.6L0202D1275A02

















































































































































































Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands

Roline UD.6L0202D1275A02, User Manual

Search results

Summary of Contents for UD.6L0202D1275A02

Reviews:

Related manuals for UD.6L0202D1275A02

Brands by name

Popular brands