Roline UD.6L0202D1275A02, User Manual

Page: 46 / 176

User M anual of Network Video Recorder
46
4.2.3 Customizing Patrols
Purpose:
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving
on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps
above in Customizing Presets .
Steps:
1. Enter the PTZ Control interface.
M enu>Camera>PTZ>M ore Settings
2. Select patrol number in the drop-down list of patrol.
3. Select the under Patrol option box to add key points for the patrol.
Figure 4. 6
PTZ- Add Key Point
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of
patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which the
PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The S peed defines the speed at which the PTZ will move from one key point to the
next.
Figure 4. 7
Key Point Configuration
5. Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.