4
Features of this Machine
Layered projection technology printing
The monoFab ARM-10 is a 3D printer that uses layered projection technology.
It employs photo-curable resin (referred to simply as
“resin”
in this manual), a fluid that hardens (cures) when exposed to light (UV rays),
and a projector with a UV LED light source to print an object based on 3D data.
"
The advantages of using the layer exposure method to print objects one layer at a time
The printing method whereby print data is sliced into layers at regular intervals, each of which is exposed (irradiated with light) by a
projector one layer at a time, is referred to as the layer exposure method.
This printing method makes it possible to print multiple jobs simultaneously and to print complex shapes with undercuts.
"
“Print Multiple Objects Simultaneously”
monoFab Player AM - A dedicated output program that can be used to start printing immediately
monoFab Player AM is a dedicated program for outputting 3D data in STL format to the ARM-10.
monoFab Player AM can be downloaded from the following web page:
"
“Roland DG Start-up page”
(http://startup.rolanddg.com/)
Summary of Contents for monoFabARM-10
