Part Names
8
Inside the Front Cover
1
2
6
7
8
9
11
10
3
4
5
Number Name
Explanation
1
Z axis unit (inside red box)
The device that moves the printing
platform.
2
Printing platform handle
Used to install and remove the printing
platform.
3
Shutter lever
By installing the liquid material vat,
the UV irradiation outlet shutter on
the bottom of the liquid material vat is
opened.
4
UV irradiation outlet (with shutter)
When the shutter opens, UV rays are
emitted from the machine.
5
Liquid material vat stopper
Secures the liquid material vat in place.
When the stopper is disengaged, the
liquid material vat moves toward you.
6
Printing platform retaining screw
The screw that secures the printing
platform.
7
Z0 adjustment screw
When setting the initial printing height
(Z0), loosen the Z0 adjustment screws
(p. 24).
8
Printing platform
The part on which the job is created.
The job is printed while the printing
platform is raised.
9
Liquid material vat
The container to which resin for
modeling is added.
10
Liquid material vat retaining screws
Screws for securing the liquid material
vat holder.
11
Liquid material vat holder
Screws for securing the liquid material
vat.
Summary of Contents for monoFabARM-10
