Appendix
50
Main Specifications
Specification Table
ARM-10
Build technology
Layer projection system
Build size
130 (W) x 70 (D) x 70 (H) mm, 5.1 (W) x 2.7 (D) x 2.7 (H) inches (Job volume of resin is up to 300 g (0.7 lbs))
Build speed
10 mm/h (Layer pitch = 0.15 mm)
Light source
UV-LED (ultraviolet light emitting diode)
XY resolution
0.2 mm
Z axis resolution
0.01 mm
Power
Machine
DC 24 V, 0.6 A
Dedicated AC adapter AC 100 V to 240 V +/- 10%, 50/60 Hz
Power consumption
15 W
Acoustic noise
level
During operation
55 dB (A) or less
During standby
49 dB (A) or less
Dimensions
430 (W) x 365 (D) x 450 (H) mm, 17.0 (W) x 14.4 (D) x 17.8 (H) inches
Weight
17 kg, 37.5 lbs
Interface
USB
Installation
environment
During operation
Temperature of 20 to 30°C, 68 to 86°F, 35 to 80% relative humidity (no condensation)
Not operating
Temperature of 5 to 40°C, 41 to 95°F, 20 to 80% relative humidity (no condensation)
Accessories
AC adapter, Power cord, USB cable, Liquid material vat, Printing and washing tools (Metallic spatula, Plastic spatula, Tweezers, Washing
container x 2, Hexagonal wrench, Spanner, Rubber gloves, Work tray, etc.), Start-up page information card, Read this first (Booklet).
Supplies (sold separately)
Resin (350 g bottle), Liquid material vat
Summary of Contents for monoFabARM-10
