Output (Printing)
27
Output data and start printing
CAUTION
Never move the Z axis unit (including the printing platform) with your hands.
Doing so may cause a breakdown.
CAUTION
When handling resin, wear rubber gloves and protective eyewear.
Do not allow resin to come into contact with the skin or eyes.
Check print data (Preview)
Slice positioned objects in the height direction (Z axis direction).
[Display Preview]
button
Clicking the
[Display Preview]
button displays the object
in slices.
Check that the printing results displayed are as you intended.
Summary of Contents for monoFabARM-10
