Roland monoFabARM-10, User Manual

Page: 5 / 53

5
Important Notes on Handling and Use
Be sure to observe the following important points. Failure to observe them may not only result in loss of performance, but may also cause malfunction or
breakdown.
Modeling Machine
This machine is a precision device
• Handle carefully, and never subject the machine to impact or excessive force.
• Use within the range of specifications.
•
Never attempt to move the Z axis unit by hand with undue force.
•
Never needlessly put your hand or fingers inside the cover, or other internal areas of the machine.
Install in a suitable location
• Never install in a location exposed to direct sunlight.
• Install in a location having the specified temperature and relative humidity.
Installation
Environment
Operating
Temperature of 20 to 30°C, 68 to 86°F, 35 to 80% relative humidity (no condensation)
Not operating
Temperature of 5 to 40°C, 41 to 95°F, 20 to 80% relative humidity (no condensation)
• Install in a quiet, stable location offering good operating conditions.
This machine becomes hot.
•
Install in a well-ventilated location.
Do not let children use the machine unsupervised and do not keep in the reach of infants.
• To avoid the swallowing of small parts and the like, do not keep the machine in the reach of infants.
• Do not let children play with any plastic bag used for packaging. Putting a bag over one’s head or ingesting it could result in suffocation.