Important Notes on Handling and Use
6
Photo-curable Resin
Handling of photo-curable resin
•
When handling photo-curable resin, wear gloves and do not let it come into contact with skin.
•
If photo-curable resin gets on the skin, wash thoroughly with soap.
•
If photo-curable resin gets on the machine, wipe it off using a rag soaked with ethanol.
Handling of photo-curable resin containers
•
Never drop or shake forcefully. Failure to do so may result in resin leakage.
Storage
•
The expiration date for photo-curable resin is one year from the date of manufacture shown on the photo-curable resin container.
•
Store photo-curable resin away from direct sunlight or strong lighting.
•
Store in a well-ventilated area between 5°C and 40°C.
•
Always close the lid securely when storing a photo-curable resin container. Failure to do so may result in resin leakage.
Disposal
•
Do not return used photo-curable resin to the photo-curable resin container.
•
Transfer excess resin after printing to a transparent container, let it cure, and then dispose of it according to local waste sorting criteria. (Do not dispose of resin
in sewage systems or rivers.)
Summary of Contents for monoFabARM-10
