Output (Printing)
17
Print Multiple Objects Simultaneously
Positioning multiple jobs so that they fit in the machine’s work area lets you print them simultaneously.
The maximum printable size (work area) is 130 (W) x 70 (D) x 70 (H) mm.
MEMO
•
The maximum printable resin volume is 300 g.
•
The actual time it takes to complete printing is proportional to the height of the job (Z axis direction).
•
If multiple objects are positioned in the work area, supports are generated as though for a single object.
•
As a result, when multiple objects have been positioned in the work area and supports have been generated, all the supports will be deleted if any one of the
objects is deleted.
The actual work area is inverted as shown in the figure below.
Printing platform plane
Work area
70mm
70mm
Work area
130mm
Improving production efficiency
With the layer exposure method, printing time is largely unaffected by the number of jobs printed at the same time, so it is possible to improve production
efficiency.
Summary of Contents for monoFabARM-10
