manualshive.com logo in svg

Rohde & Schwarz ZVT Series, Getting Started

Share
Download
Rohde & Schwarz ZVT Series Getting Started Download Page 3

Contents

R&S

®

 ZVT

3

Getting Started 1300.0045.62 ─ 10

Contents

1 Preparing the Analyzer for Use.............................................................7

1.1

Front Panel Tour........................................................................................................... 7

1.1.1

Standby Key....................................................................................................................8

1.1.2

Front Panel Connectors.................................................................................................. 8

1.2

Rear Panel Tour...........................................................................................................11

1.3

Putting the Analyzer into Operation..........................................................................12

1.3.1

Unpacking and Checking the Analyzer......................................................................... 13

1.3.2

Setting up the Analyzer................................................................................................. 14

1.3.3

Bench Top Operation.................................................................................................... 14

1.3.4

Operation in a 19" Rack................................................................................................ 14

1.3.5

EMI Suppression...........................................................................................................15

1.3.6

Connecting the Analyzer to the AC Supply................................................................... 15

1.3.7

Power on and off........................................................................................................... 15

1.3.8

Standby and Ready State............................................................................................. 16

1.3.9

Replacing Fuses........................................................................................................... 16

1.4

Starting the Analyzer and Shutting Down.................................................................16

1.5

Windows Operating System.......................................................................................17

1.6

Connecting External Accessories............................................................................. 18

1.7

Connecting to a LAN...................................................................................................19

1.7.1

Physical LAN Connection..............................................................................................20

1.7.2

TCP/IP Configutation.................................................................................................... 20

1.7.3

Test Setups with two LAN Connections........................................................................ 21

1.8

Remote Desktop Connection..................................................................................... 22

1.9

Firmware Update......................................................................................................... 23

2 Getting Started..................................................................................... 25

2.1

Performing a Reflection Measurement..................................................................... 25

2.1.1

Instrument Setup for Reflection Measurements............................................................26

2.1.2

Parameter and Sweep Range Selection....................................................................... 27

2.1.3

Instrument Calibration .................................................................................................. 28

2.1.4

Evaluation of Data ........................................................................................................30

2.1.5

Saving and Printing Data ............................................................................................. 31

Summary of Contents for ZVT Series



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands