manualshive.com logo in svg

Rohde & Schwarz ZVT Series, Getting Started

Share
Download
Rohde & Schwarz ZVT Series Getting Started Download Page 4

Contents

R&S

®

 ZVT

4

Getting Started 1300.0045.62 ─ 10

2.2

Performing a Transmission Measurement............................................................... 32

2.3

Basic Tasks................................................................................................................. 32

2.3.1

Data Entry..................................................................................................................... 32

2.3.2

Scaling Diagrams.......................................................................................................... 33

3 System Overview................................................................................. 37

3.1

Basic Concepts........................................................................................................... 37

3.1.1

Global Resources..........................................................................................................37

3.1.2

Setups........................................................................................................................... 38

3.1.3

Traces, Channels and Diagram Areas.......................................................................... 38

3.1.4

Data Flow...................................................................................................................... 40

3.2

Screen Elements......................................................................................................... 42

3.2.1

Navigation Tools of the Screen..................................................................................... 42

3.2.2

Display Elements in the Diagram Area......................................................................... 47

3.2.3

Dialogs.......................................................................................................................... 55

3.2.4

Display Formats and Diagram Types............................................................................58

3.3

Measured Quantities...................................................................................................67

3.3.1

S-Parameters................................................................................................................ 67

3.3.2

Impedance Parameters.................................................................................................69

3.4

Calibration................................................................................................................... 79

3.4.1

Calibration Standards and Calibration Kits................................................................... 80

3.4.2

Calibration Types.......................................................................................................... 81

3.4.3

Automatic Calibration.................................................................................................... 82

3.4.4

Power Calibration..........................................................................................................85

3.4.5

Offset Parameters......................................................................................................... 85

3.5

Optional R&S ZVT Extensions................................................................................... 85

3.5.1

Time Domain (R&S ZVAB-K2)...................................................................................... 87

3.5.2

Arbitrary Generator and Receiver Frequencies (R&S ZVA-K4).................................... 87

3.5.3

Arbitrary Gen. and Rec. Frequencies (R&S ZVA-K4)................................................... 87

3.5.4

Mixer Phase Measurement (R&S ZVA-K5)...................................................................88

3.5.5

True Differential Mode (R&S ZVA-K6).......................................................................... 88

3.5.6

Measurements on Pulsed Signals (R&S ZVA-K7)........................................................ 89

3.5.7

Converter Control (R&S ZVA-K8)................................................................................. 89

3.5.8

Mixer Delay w/o LO Access (R&S ZVA-K9)..................................................................89

Summary of Contents for ZVT Series



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands