Preparing the Analyzer for Use
R&S
®
ZVT
21
Getting Started 1300.0045.62 ─ 10
your network. If you use both LAN connectors, you need two different sets of
address information.
2. Press the Windows key on an external keyboard or on the hardkey bar of the NWA
GUI to access the Start Menu and from there open the Control Panel.
3. For each LAN interface to be configured, enter the IPv4 protocol stack configura-
tion provided by your network administrator, e.g.
Windows XP: "Control Panel – Network Connections – Local Area Connection Sta-
tus – Local Area Connection Properties – Internet Protocol (TCP/IP) Properties"
Windows 7: "Control Panel – Network and Internet – Network and Sharing Center –
Change adapter settings – Change Settings of this conection – Internet Protocol
version 4 (TCP/IPv4) Properties"
1.7.3 Test Setups with two LAN Connections
The two LAN connectors on the rear panel of the analyzer are equivalent. With one
LAN connector used to establish a connection to a home/company network, the other
one can be used to connect an additional instrument, e.g. an additional analyzer or sig-
nal generator.
Connecting to a LAN
