Rohde & Schwarz SpycerNode SC User Manual Download Page 79

Page: 79 / 108

Maintenance

User Manual | 2902.5569.01 - 03

Removing the Top Cover

SpycerNode SC

Removing the Top Cover

This section guides you through the process of opening the casing. This is
required e.g. in case you have to replace a defective storage drive or a
cooling fan.

Perform the following steps:

Simultaneously press the cover release buttons on both sides of the
casing.

Push and slide the top covers in the direction shown. Push in the direc-
tion of 2a to open cover A; push in the direction of 2b to open cover B.

Lift the covers to remove them and set them aside.

Reverse the steps above to mount the top cover back in place.

The top cover is now removed.

Summary of Contents for SpycerNode SC













































































































Search results

Summary of Contents for SpycerNode SC

Reviews:

Related manuals for SpycerNode SC

Brands by name

Popular brands

Rohde & Schwarz SpycerNode SC, User Manual

Search results

Summary of Contents for SpycerNode SC

Reviews:

Related manuals for SpycerNode SC

Brands by name

Popular brands