Rohde & Schwarz SpycerNode SC, User Manual

Page: 44 / 108

Installation
Initial Setup
SpycerNode SC
44
User Manual | 2902.5569.01 - 03
10. Define a virtual IP address for the export services (e.g. via Samba). It is
already preset to the same subnet domain, thus you have to provide only
the last three digits. If required, you can also change the network inter-
face for the export services.
11. A summary is presented in the last step with the option to make changes
to the file system and virtual IP configuration settings. Press
Apply to
system to confirm the settings.
Windows drive letter Define the drive letter designation for the your file system
at your connected Windows native clients.
File system alloca-
tion type Defines the type of allocation:
●
Performance mode - writes the files subsequently one
ofter the other. The initial performance is much higher,
however it degrades with higher data storage capacity in
use.
●
Endurance mode - Scatters the data gradually over the
disk drives, thus providing for a constant performance
and stable latency.
Completing the Easy Setup Wizard will provide the basic settings required to
start operating your system. Further settings options are available through
the R&S®Device Manager after the initial setup.