Maintenance
System Disk Recovery
SpycerNode SC
94
User Manual | 2902.5569.01 - 03
Creating a Backup Image
The following describes the steps to make a backup image of the current
system disk and save it to the USB flash drive.
Perform the following steps:
1.
If appropriate, disconnect all externally connected storage devices from
the system.
2.
Connect the bootable USB flash drive created in "Preparing a Bootable
USB Drive" (page 91).
3.
Turn on the SpycerNode SC. At the indicated moment during start-up
you have to press
[F11]
to enter the boot menu.
The boot menu is displayed on the screen.
4.
Select the USB flash drive as the boot device.
5.
Press
[Enter]
.
The system will boot from the USB flash drive.
You will see a window on the screen where you can select the R&S
Rescue environment for loading.
6.
Select RuS Rescue and press
[Enter]
.
To complete the loading of the R&S Rescue environment some user entries
are required. For this follow the instructions given on the screen.
The loading of the environment and the process itself will both try to initialize
hardware that may not be present on your system. Any error messages dis-
played during loading/initialization, e.g.
Failed
or
Warning
, can be disre-
garded. The backup/recovery process should work nonetheless.
Summary of Contents for SpycerNode SC
