Rohde & Schwarz SpycerNode SC, User Manual

Page: 26 / 108

Product Description
The Rear of the System
SpycerNode SC
26
User Manual | 2902.5569.01 - 03
ATX Panel
ATX Panel Connectors
The ATX connector panel on the rear of the R&S system holds the connec-
tors of the computer system. It provides the following connections:
COM1 Port RS232 connector for the connection of serial interface
devices.
LAN RJ-45 (IPMI) 1 Gb Ethernet connection port to connect the system to a
network.
USB 3.1 Gen2 (type C) A type-C USB to connect external devices to the system.
ID System Indicator Press to trigger the green ID LED located on the front of
the system. Useful e.g. to locate the system within a rack
among many other systems.
VGA DB-15 connector (female) to connect a monitor to the
system.
USB 3.1 Gen1 USB connectors to connect external devices to the
system.
2 x LAN RJ-45 2 x 10 Gb Ethernet connection ports to connect the
system to a network. By default, the left network port is
set to
DHCP
(Dynamic Host Configuration Protocol),
whereas the left one is pre-configured to a static 10.0.0.4
IP address.
VGA
2 x USB 3.1 Gen1
2 x LAN RJ-45, 10Gbit
COM1 port
LAN RJ-45 (IPMI), 1Gbit
USB 3.1 Gen2 (type C)
ID System
Indicator