manualshive.com logo in svg

Rohde & Schwarz SpycerNode SC, User Manual

Share
Download
Rohde & Schwarz SpycerNode SC User Manual Download Page 43

Installation

43

User Manual | 2902.5569.01 - 03

Initial Setup

SpycerNode SC

8.

In the next installation phase, the file system configuration is carried out. 
First, the metadata drives and the installed storage capacity are 
displayed.

9.

In the next step you select the interface for you storage network connec-
tion.

Zone 1

Shows the number of metadata drives, the drive type, the 
capacity, and RAID level.

Zone 2 / Zone 3

Shows the installed storage drives type, their capacity and the 
level of RAID protection. Each zone represents a single drive 
set which consists always of 30 drives. A system with half the 
capacity will have only one zone populated.

Network interface (IP)

Select the network interface for your file system. The 
connection is usually established via the 100Gbit (option-
ally 200Gbit) interfaces.

File system name

Provide a name for your file system.

Linux mount point

Define the mount path for this file system at your 
connected Linux native clients.

Summary of Contents for SpycerNode SC













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands