Rohde & Schwarz SpycerNode SC User Manual Download

Page: 53 / 108

Installation

User Manual | 2902.5569.01 - 03

Installing the Spectrum Scale Client

SpycerNode SC

Installing the Spectrum Scale Client

This section describes the spectrum scale client installation on your system.

The following topics are covered:

●

Installing under Linux (page 53)

●

Installing under Windows (page 55)

●

Adding a Native Spectrum Scale Client (page 62)

●

Removing a Native Spectrum Scale Client (page 63)

Installing under Linux

Preparations

Perform the following steps:

In the R&S

Device Manager navigate to

Maintenance > Software

installer

, and download the corresponding SSFS installer package.

Install the packages:

yum -y install gpfs.base gpfs.docs gpfs.ext

gpfs.gpl gpfs.gskit gpfs.msg.en_US gpfs.gui

gpfs.gss.pmsensors gpfs.gnr gpfs.license.ds

Summary of Contents for SpycerNode SC













































































































Search results

Summary of Contents for SpycerNode SC

Reviews:

Related manuals for SpycerNode SC

Brands by name

Popular brands

Rohde & Schwarz SpycerNode SC, User Manual

Search results

Summary of Contents for SpycerNode SC

Reviews:

Related manuals for SpycerNode SC

Brands by name

Popular brands