Rohde & Schwarz SpycerNode SC, User Manual

Page: 25 / 108

Product Description
25
User Manual | 2902.5569.01 - 03
The Rear of the System
SpycerNode SC
Power Supply Units
Dual PSUs provide redundant power for the system: if one PSU fails, the
other will keep the system running while you replace the faulty module. The
PSUs are hot-swappable.
Power connectors Power is provided by two 1600 W PSU‘s These require an
input of 200 to 240 VAC at 50 to 60 Hz. The IEC C14 AC
connector requires a C13 AC jack.
System Damage
Replacement of a PSU can be performed while the system is running, but
the procedure must be completed immediately after the removal of the
defective PSU, otherwise a continued operation of the system cannot be
guaranteed.
Change a failed power supply unit immediately. Ensure you have a
replacement PSU before you remove the defective unit.
For information on how to exchange a PSU see "Replacing a Power Supply
Unit" (page 80).