Rohde & Schwarz SpycerNode SC, User Manual

Page: 7 / 108

General
7
User Manual | 2902.5569.01 - 03
About this Documentation
SpycerNode SC
Operators
Operators are responsible for the day-to-day operation of the system, trou-
bleshooting and basic maintenance work. Also, operators must be trained by
the client company to prevent hazards from electrical or mechanical compo-
nents and to avoid property damage.
Additional Documentation
The complete documentation can be downloaded from
https://gloris.rohde-schwarz.com after registering/logging in to access
restricted information. There you may find updated manuals as well as
further information on your product.
Chapters Overview
The chapters contain the following information:
Chapter "General" on
page 5 Begins with a short introduction to SpycerNode SC,
followed by a note regarding the audience this manual is
written for, and information on additional documentation.
Chapter "Safety" on
page 11 Provides all required safety instructions and important
notes you must adhere to protect your equipment and
avoid
personal injury.
Chapter "Product
Description" on
page 17 This chapter gives a front and rear overview of the system
detailing all items, connectors and interfaces. Additionally,
it contains some further information, for example, about
the digital video in- and outputs.
Chapter "Installa-
tion" on page 29 Describes the necessary steps to install the hardware of
the system and perform the initial software setup.
Chapter "Operation"
on page 65 Explains how to operate the system via the
R&S®Device Manager - a monitoring and setup tool for all
Rohde & Schwarz devices connected within the same
network.
Chapter "Mainte-
nance" on page 77 Details maintenance work, for example, in case of a disk,
an or power supply unit failure.
Chapter "Appendix"
on page 99 Provides technical details and general information about
the hardware of the system.