Rohde & Schwarz SpycerNode SC, User Manual

Page: 97 / 108

Maintenance
97
User Manual | 2902.5569.01 - 03
System Disk Recovery
SpycerNode SC
6. Select RuS Rescue and press [Enter] .
 Once the loading has finished, you will see the R&S Rescue script
with its options on the screen. Your display should look similar to the
following:
7. To restore your system disk from the USB flash drive, press [2] and then
[Enter] .

A list of possible target devices will be detailed on the screen. The
system disk normally is the ’ATA’ disk with, for example, ’sda’, ’sdb’ or
’sdc’ as its device name:
(e.g.:
1:0:0:0 disk ATA <device info> /dev/sda
).
To complete the loading of the R&S Rescue environment some user entries
are required. For this, follow the instructions given on the screen.
The loading of the environment and the process itself will both try to initialize
hardware that may not be present on your system. Any error messages dis-
played during loading/initialization, e.g.
Failed
or
Warning
, can be disre-
garded. The backup/recovery process should work nonetheless.
If you do not perform any action, RuS Rescue will be loaded automatically af-
ter 30 seconds.
--- RuS Rescue ---
1 - Backup on internal USB device
2 - Restore from internal USB device
3 - Backup on self selected external device
4 - Restore from self selected external device
5 - Reboot the system
6 - Poweroff the system
0 - Exit
Enter selection:
Ex factory the SpycerNode SC will be delivered with ’sda’ as the default sys-
tem disk. If other configurations have been made later or on customer re-
quest, this may be different.
Data Loss
A recovery will overwrite all your data.
Continue with the following steps only when you are
able to identify the correct target device.