Rohde & Schwarz SpycerNode SC, User Manual

Page: 12 / 108

Safety
General
SpycerNode SC
12
User Manual | 2902.5569.01 - 03
General
Please observe the following important safety notes:
●
If this equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
●
This equipment is to be installed for operation in an environment with
ambient temperature below 35°C, see also "Environmental Conditions"
(page 102).
●
All plug-in modules and blank plates are part of the fire enclosure and
must only be removed when a replacement can be immediately added.
The system must not be run without all modules or blanks in place.
●
Unplug the system before you move it or if you think it has become
damaged in any way.
●
In order to comply with applicable safety, emission and thermal require-
ments no covers should be removed, and all bays must be populated
with plug-in modules or blanks.
●
Do not remove cooling fans, PSUs or I/O Modules unless you have a
replacement model of the correct type ready for insertion.
●
The system is to be operated only when mounted and mechanically
secured into a 19-inch rack.
●
The storage drives are to be installed only after having mounted the
system into the rack. Also, the storage drives must be removed prior to
dismounting the system from the rack.
●
It is recommended that you wear a suitable anti-static wrist or ankle strap
and observe all conventional ESD precautions when handling plug-in
modules and components. Avoid contact with backplane components
and module connectors, etc.