Rohde & Schwarz R&S FPH User Manual Download

Page: 73 / 484

Getting Started

R&S

Spectrum Rider FPH

User Manual 1321.1011.02 ─ 06.00

For a direct connection between a PC and the R&S Spectrum Rider, DHCP (Dynamic

Host Configuration Protocol) has to be turned off (which is the default state).

1. In the "Instrument Settings" dialog box, select the "DHCP" item.

A drop-down menu opens to select the DHCP state.

2. Select "DHCP" to on or off as required.

Setting an IP address and subnet mask

To establish a connection, the PC and the R&S Spectrum Rider have to be in the same

subnet.

Subnet mask

1. Identify the subnet mask of your PC, i.e. in the Microsoft Windows "TCP/IP Proper-

ties".

2. In the "Instrument Settings" dialog box, select the "Subnet Mask" item.

3. Enter the subnet mask of the PC with the numeric keys.

Instrument Tour

Summary of Contents for R&S FPH





































































































































































































































































































































































































































































































Search results

Summary of Contents for R&S FPH

Reviews:

Related manuals for R&S FPH

Brands by name

Popular brands

Rohde & Schwarz R&S FPH, User Manual

Search results

Summary of Contents for R&S FPH

Reviews:

Related manuals for R&S FPH

Brands by name

Popular brands