Interference Analyzer
R&S
®
Spectrum Rider FPH
249
User Manual 1321.1011.02 ─ 06.00
The R&S Spectrum Rider opens a submenu to select the different geotags saving
options.
3. Select the "Azimuth Only" menu item.
The R&S Spectrum Rider opens an input field to change the azimuth (the GPS
data itself is not changed). Note that the azimuth line is updated in real time when
you change its angle.
Perform triangulation
Triangulation is performed to calculate and determine the source of interference.
1. Select the "GPS Position" softkey.
2. Select the "GPS Position List" softkey.
The R&S Spectrum Rider opens the "GPS position list" dialog box.
3. Select two or three geotags and display them on the map.
.
4. Select the "GPS Position" softkey.
5. Select the "Triangulation" softkey.
The R&S Spectrum Rider calculates the intersection point of the geotags you have
selected. The result is displayed on the map as a dot that is surrounded by a circle.
See
.
By default, the dot and circle are blue. However, you can assign a different color to
the triangulation results. See
"Default behavior of geotags in triangulation "
Figure 11-7: Triangulation result
Working with Maps
