Remote Commands
R&S
®
Spectrum Rider FPH
304
User Manual 1321.1011.02 ─ 06.00
TRIGger[:SEQuence]:LEVel:VIDeo
<VideoTrigLevel>
This command defines the level of the video trigger.
Video trigger is available for time domain measurements (span
=
0).
Parameters:
<VideoTrigLevel>
Range:
0 PCT to 100 PCT
*RST:
50 PCT
Example:
TRIG:LEV:VID 50PCT
Sets the trigger level to 50%.
TRIGger[:SEQuence]:SLOPe
<TriggerSlope>
This command selects the slope of the trigger signal.
The trigger slope applies to all trigger sources.
Parameters:
<TriggerSlope>
POSitive | NEGative
*RST:
POSitive
Example:
TRIG:SLOP NEG
TRIGger[:SEQuence]:SOURce
<TriggerSource>
This command selects the trigger source.
Parameters:
<TriggerSource>
IMMediate | EXTernal | VIDeo | GATed
IMMediate
Selects Free Run measurements.
EXTernal
Selects an external trigger.
VIDeo
Selects the video trigger.
*RST:
IMMediate
For more information, see chapter "Setting the Sweep".
Example:
TRIG:SOUR EXT
Selects the external trigger input as source of the trigger signal.
13.6.2.5
Working with Traces
The following commands set up the trace and the various functions associated with it,
e.g. trace mathematics or the selection of the detector.
List of commands
●
CALCulate<1...2>:MATH<1...2>[:EXPRession][:DEFine]
Remote Control - Commands