Getting Started
R&S
®
Spectrum Rider FPH
29
User Manual 1321.1011.02 ─ 06.00
Risk of losing data
If a running instrument (without battery) is disconnected directly from the power cord,
the instrument loses its current settings. Furthermore, program data may be lost.
Press the [Power] key first to shut down the application properly.
The following shows the [POWER] key behavior in different operation modes.
Table 3-1: Summary of LED indication on POWER key
LED indication on [Power] key
Descriptions
Green LED
Instrument is in operation mode.
Blue LED
Instrument is in switch off mode with a fully charged battery. A blink-
ing blue LED indicates that the battery charging is in process.
Amber LED
Instrument is in switch off mode with AC supply and there is no bat-
tery in it.
Red LED
There is an error in the battery charging.
LED "OFF"
This is an indication that there is no AC or DC supply to the instru-
ment. The instrument is in a switch off mode.
3.1.3
Checking the Supplied Options
The instrument can be equipped with different hardware and installed options. For a list
of R&S Spectrum Rider supported hardware and installed options, refer to the instru-
ment brochure for the list of options available.
In order to check whether the installed options correspond to the options indicated in
the delivery note, proceed as follows.
1. Press the [SETUP] key.
2. Select the "Installed Options" softkey.
A list of all available options and the current status of the options are displayed.
Preparing for Use
