Interference Analyzer
R&S
®
Spectrum Rider FPH
234
User Manual 1321.1011.02 ─ 06.00
●
The R&S Spectrum Rider calculates and displays the distance between measure-
ment points (in meters or feet, depending on the regional settings).
●
You are able to embed the collected data into maps with a larger scale. Thus, you
are able to, for example, combine measurement data recorded with the "Outdoor
Mapping" application and data recorded with the "Indoor Mapping" application in a
single map. For more information, see
Chapter 11.3.5, "Collecting Map Data"
11.3.3
Displaying Maps
After you have downloaded or created the maps, save them to a USB flash drive,
which you can use with the R&S Spectrum Rider.
1. Press [MEAS] key.
2. Select "Meas Mode" softkey.
The R&S Spectrum Rider opens a submenu that contains the measurement func-
tion for selection.
3. Select the "Outdoor Mapping" menu item.
The R&S Spectrum Rider provides the outdoor mapping measurement functions.
4. Select the "Map" softkey.
The R&S Spectrum Rider opens a menu that contains all the maps that you have
stored on the USB flash drive. (The map names correspond to the folder names for
every area you have saved, see
5. Select the maps of the area you need.
In the "Outdoor Mapping" operating mode, the "Auto Select" menu item automati-
cally selects the map that is most fitting to your current location. Using the auto-
matic selection requires a GPS receiver.
Working with Maps
