Remote Commands
R&S
®
Spectrum Rider FPH
401
User Manual 1321.1011.02 ─ 06.00
Whilst the data records are stored on the instrument hard disk with SAVE/RECALL
(
MMEMory:STORe
,
MMEMory:LOAD
), it is possible to store the data in an external com-
puter by means of
SYSTem:SET
.
The receive terminator has to be set to EOI to ensure reliable transfer of data (setting
SYST:COMM:GPIB:RTER EOI
).
Parameters:
<arg0>
<block_data>
Example:
SYST:SET
SYSTem:SHUTdown
This command turns the R&S Spectrum Rider off.
This command is an event and therefore has no *RST value and no query.
Example:
SYST:SHUT
Turns the R&S Spectrum Rider off.
Usage:
Event
SYSTem:TIME
<Hour>, <Minutes>, <Seconds>
This command sets the internal clock.
Parameters:
<Hour>
Range:
0 to 23
<Minutes>
Range:
0 to 59
<Seconds>
Range:
0 to 59
Example:
SYST:TIME 12,30,30
SYSTem:TZONee
<Hour>, <Minutes>
This command defines a shift of the system time to select another time zone.
Parameters:
<Hour>
Range:
0 to 23
<Minutes>
Range:
0 to 59
*RST:
0,0
Example:
SYST:TZON 01,00
Shifts the time an hour ahead.
SYSTem:VERSion?
This command queries the SCPI version the remote control is based on.
This command is a query and therefore has no *RST value.
Remote Control - Commands