Interference Analyzer
R&S
®
Spectrum Rider FPH
242
User Manual 1321.1011.02 ─ 06.00
3. Select the "Traingulation" mode.
The R&S Spectrum Rider enters the triangulation measurement mode.
4. Select the "Settings" softkey.
5. Select the "GPS Settings" softkey.
The R&S Spectrum Rider opens a submenu to select the different GPS settings.
6. Enable or disable the GPS or compass setting associated with the antenna type.
The currently selected antenna model is displayed in the
indicates the state of the satellite lock of the GPS receiver of the antenna model.
For more information on the GPS receiver states,
"Displaying GPS information"
on page 58.
11.3.4.2
Using Limits
The R&S Spectrum Rider allows you to define limits within which the signal level must
be in order to be recognized as a signal.
1. Press the [LINE] key.
2. Select the "Upper Limit" or "Lower Limit" softkey.
The R&S Spectrum Rider opens an input field to define the limits. Signals that are
above the upper limit and below the lower limit are ignored. Only the signals within
these boundaries are considered in the analysis.
The limits that you have defined are displayed in the power bar as red triangles.
See item 8 of
Working with Maps
