Rohde & Schwarz FSW-K40, User Manual

Page: 53 / 166

Analysis
R&S
®
FSW-K40
53 User Manual 1173.9286.02 ─ 15
Remote command:
Top:
DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel
on page 122
Range:
DISPlay[:WINDow]:TRACe:Y:[:SCALe]
on page 121
Bottom:
DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:LOWer
on page 122
Auto Scale Once
Automatically scales the vertical axis for ideal viewing.
6.1.2 Configuring Traces
Trace Offset .................................................................................................................. 53
Trace Smoothing ...........................................................................................................53
Smoothing Type ............................................................................................................ 53
Trace Config ..................................................................................................................54
└ Traces ............................................................................................................. 54
└ Quick Config ................................................................................................... 54
└ Trace Export ................................................................................................... 55
└ Copy Trace .................................................................................................... 55
└ Trace Math ......................................................................................................56
Spur Removal / Spur Threshold ....................................................................................56
Frequency Drift: Trace 1 (On Off) ................................................................................. 56
Spectrum Monitor: Raw Trace / Trk Trace (On Off) ...................................................... 56
Trace Offset
Defines a trace offset in dB.
The trace offset moves the trace vertically by the level you have defined.
The range is from -200 dB to 200 dB.
Remote command:
DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet
on page 123
Trace Smoothing
Defines the magnitude (or aperture) of trace smoothing in percent.
The range is from 1% to 20%. The aperture takes effect on all traces that you smooth.
For more information see Chapter 4.5.3, "Trace Smoothing" , on page 26.
Remote command:
DISPlay[:WINDow]:TRACe<t>:SMOothing:APERture
on page 118
Smoothing Type
Selects the method that the application uses to smooth the trace.
For more information see Chapter 4.5.3, "Trace Smoothing" , on page 26.
"Linear" Converts the data to linear values before smoothing the trace.
"Logarithmic" Smoothes the (original) logarithmic data.
Configuring Graphical Result Displays