Safety and Regulatory Information
R&S
®
QAR
7
User Manual 1178.7200.02 ─ 09
1
Safety and Regulatory Information
The product documentation helps you use the R&S
QAR safely and efficiently. Follow
the instructions provided here and in the safety instructions.
Intended use
The product is intended for the development, production and verification of electronic
components and devices in industrial, administrative, and laboratory environments.
Use the product only for its designated purpose. Observe the operating conditions and
performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential dan-
gers and gives instructions on how to prevent personal injury or damage caused by
dangerous situations. Safety information is provided as follows:
●
In the safety instructions. The same information is provided in many languages as
printed "Safety Instructions". The printed "Safety Instructions" are delivered with
the R&S
QAR.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
1.1
Safety Instructions
The R&S
QAR Quality Automotive Radome Tester is manufactured according to the
highest technical standards. To use the scanner safely, follow the instructions provided
here and throughout the product documentation. Keep the documentation nearby and
offer it to other users.
Use the R&S
QAR only as intended and within its performance limits. The limits are
described in the product documentation, such as the data sheet, manuals and this bro-
chure. If you are unsure about the appropriate use, contact the Rohde
&
Schwarz cus-
tomer service.
Using the R&S
QAR requires specialists or specially trained personnel. The operators
also need sound knowledge of at least one of the languages in which the user interface
and the product documentation are available.
If any part of the product is damaged or broken, stop using the product. Never open
the casing of the R&S
QAR or its components. Only service personnel authorized by
Rohde
&
Schwarz are allowed to repair the product.
Lifting, carrying and installing the R&S
QAR
The R&S
QAR is heavy and can cause physical injuries when it falls or tips over.
The R&S
QAR must be installed and set up by trained staff. When you carry, lift or
move the R&S
QAR, use the carrying handles on the back side of the R&S
QAR. Dur-
Safety Instructions
