Rohde & Schwarz 1336.5401.02, User Manual

Page: 31 / 123

Preparing for Use
R&S
®
QAR
31 User Manual 1178.7200.02 ─ 09
Whenever you lift, move or carry the R&S QAR, use the handles on its back side.
1. Screw the two supports to the R&S QAR with four socket head screws (size 5) on
each side of the R&S QAR (see Figure 4-13 ).
2. Lift the R&S QAR onto the platform into a stable position and in a right angle to the
floor.
The position is defined by the two pins on the platform as shown in
Figure 4-13 .
Those two pins fit into the two mounting holes on the frame of the R&S QAR.
Figure 4-13: R&S QAR installation, including support mounting
3. Secure the R&S QAR by screwing the two supports to the platform. Two socket
head screws with a size 10 secure each support.
The mounting holes in the platform define the position of the supports.
Note: Insert a washer between screw and support as shown in Figure 4-13 .
4. Tighten all four screws to the platform.
4.3 Connecting the R&S QAR
You can connect various devices to the R&S QAR. The following overview shows the
possible connections.
Connecting the R&S QAR