manualshive.com logo in svg

Rohde & Schwarz 1335.8794.02, User Manual, Page: 375 / 861

Share
Download
Rohde & Schwarz 1335.8794.02 User Manual Download Page 375

Power analysis (option R&S

 

RTM-K31)

R&S

®

RTM3000

375

User Manual 1335.9090.02 ─ 09

e) Scroll down. Select "Power".

To adjust the probes, open the "Probe" menu. For details, see 

Chapter 14.1.2, "Probe

settings for power measurements"

, 

on page 344.

The settings for the voltage and current sources are the same as for quality analysis,
see 

"Voltage"

 

on page 350 and 

"Current"

 

on page 350.

Set to screen

Resets the cursors to their initial positions. This is helpful if the cursors have disap-
peared from the display or need to be moved for a larger distance.

14.7

 

Power path power measurements

Power path measurements are used for analysing the behavior of the devices that con-
trol the power flow through the switched-mode power supply (SMPS) circuit, including
switching devices and inductors.

●

Efficiency

...............................................................................................................375

●

Switching loss

....................................................................................................... 378

●

Turn ON/OFF time

................................................................................................ 381

●

Safe operating area (S.O.A.)

.................................................................................384

14.7.1

 

Efficiency

The power efficiency analysis measures the input and the output power of a power
supply. The power efficiency of the power supply is then calculated as the ratio of the
output power and the input power.

14.7.1.1

 

Efficiency results

The results of " Efficiency" measurements are:

●

the voltage waveform

●

the current waveform

Power path power measurements

Summary of Contents for 1335.8794.02






























































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments