Waveform analysis
R&S
®
RTM3000
125
User Manual 1335.9090.02 ─ 09
The segment table shows the index and timestamp of all history segments, and
whether the segment was captured on a trigger event or in auto mode. Below the table,
you find the history player with functions to view the segments that are stored in the
memory.
The history segments store the data of the currently active channels. You can acquire
several channels at once, and display and analyze the channels individually.
You can show all history segments in sequence, or display a single segment.
To display history segments
1. Activate the history.
2. Stop the acquisition.
3. Set the "Time Format" to be shown in the table: absolute or relative time.
4. Set the "Speed".
5. To play all segments once, tap "Run".
6. To play all segments repeatedly:
a) Enable the "Repeat" button.
b) Tap "Run".
7. To access a particular segment, you can:
● Tap the segment in the segment table.
● Drag the slider until the required segment number is shown.
● Tap "Number" and enter the segment number. The newest segment has always
the number "0". Older segments have a negative number.
● Use "Prev." and "Next" to show the adjacent segment.
8. If the history segments contain the data of several channels and you want to ana-
lyze only one or several channels, disable all channels that you do not need.
History and segmented memory (option R&S
RTM-K15)