Rohde & Schwarz 1335.8794.02 User Manual Download Page 170

Page: 170 / 861

Applications

R&S

RTM3000

170

User Manual 1335.9090.02 ─ 09

Size+, Size-

Enlarges or decreases the mask in x- and y-direction.

Save, Load

Saves the created mask to file, or loads a previously saved mask. The file format is
MSK.

Remote command:

Capt. Fails

If selected, only failed acquisitions are saved in memory segments.

Only available with history option R&S

RTM-K15.

Remote command:

MASK:CAPTure[:MODE]

on page 541

Setup

Opens the "Setup" menu to define exact mask dimensions and the actions to be exe-
cuted on violation of the mask.

9.1.4

Mask menu

► To open the "Mask" setup menu:

● Tap the "Setup" button in the mask window.
● Tap the "Menu" icon. Select "Mask".

Mask testing

Summary of Contents for 1335.8794.02






























































































































































































































































































































































































































































































































































































































































































































































































































































































Rohde & Schwarz 1335.8794.02, User Manual, Page: 170 / 861

Search results

Summary of Contents for 1335.8794.02

Reviews: