110
Rockwell Automation Publication 20P-TG003B-EN-P - September 2021
Chapter 3
Access Procedures
8.
Remove the bolt (24 mm long) and washers that secure the L-shaped bus
bars to the top of each of the six internal armature leg fuses. Note the order
of the washers on the bolt.
9.
Remove the bolts (24mm long) and washers that secure the L-shaped bus
bars to each of the SCR modules and remove the bus bars. Note: You do
not need to remove the wires connected to the metal plate secured with
the L-shaped bus bar.
Remove bolt (24 mm long), lock
washer and flat washer
Bolt (24 mm long)
Lock washer
Flat washer
Fuse
Remove 24mm
long bolts and
washers
Leave wires in
place
