Rockwell Automation Publication 20P-TG003B-EN-P - September 2021
103
Access Procedures
Chapter 3
8.
Remove the two screws that secure the bottom of the power supply filter
circuit board to the drive.
9.
Move the control EMI shield. See
Move the Control EMI Shield on
.
10.
Remove the two screws and washers that secure the top of the power
supply filter board to the drive and carefully lift the board to gain access to
the ground wire connected to the W phase power terminal (see next step).
Remove screws
Power supply
filter board
Remove screw and washer
Remove screw and washer