108
Rockwell Automation Publication 20P-TG003B-EN-P - September 2021
Chapter 3
Access Procedures
5.
If present, remove the isolation sheet that is secured to the bus bars.
6.
Remove the bus bars in order to access the bimetal thermostats in the
drive:
•
For regenerative drives, refer to
Regenerative Drive on page 3-109
.
•
For non-regenerative drives, refer to
Remove the Bus Bars from a Non-
Regenerative Drive on page 3-111
.
IMPORTANT
You must remove the bus bars and, for regenerative drives, one SCR
module from each pair, for non-regenerative drives, all SCR modules, in
order to easily access and remove the bimetal thermostats.
Remove isolation sheet.
