Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019
19
Second Generation MobileView Tethered Operator Terminal
S10 Terminal Pin Descriptions
Configure the 2711T-JBIP65DC1 Junction Box
The 2711T-JBIP65DC1 junction box can be configured to work with second generation
MobileView terminals with Box ID functionality and illuminated E-stop buttons.
Figure 6 - IP65 Junction Box Configurable Components
IMPORTANT
The DRY contact signal can be used in the control application and is only designed for
purposes that are not safety related.
Item
PCB
Description
Description
1
B4
A DIP switch meant for MobileView terminals without Box ID functionality. Activate this DIP
switch if the MobileView terminal has an illuminated E-stop button. For more details, see
2
BOX ID
Two address switches to set the address when Box ID functionality is available on a MobileView
terminal. For more details, see
BoxID Functionality on page 20
.
3
ADJUST
Use this switch to set the brightness of the illuminated E-stop button on a second generation
MobileView terminal. For more details, see
Illuminated E-stop Button Brightness on page 21
Pin No.
PCB Description
Description
1
DRY
Closed when a second generation MobileView terminal
is connected.
When an application or control system has multiple
IP65 junction boxes available, this I/O is used to
determine which junction box has a second generation
MobileView terminal connected to it.
2
DRY
3
KEY3
Not used.
4
KEY2
5
KEY1
6
KEY0
1
2
3
