36
Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019
Second Generation MobileView Tethered Operator Terminal
Network Settings
To configure the Ethernet communications of your second generation MobileView 2711T
terminal, perform the following steps.
1.
On the second generation MobileView 2711T terminal desktop, press Network Settings.
The Local Area Connection icon appears with the network cable unplugged.
2.
Touch and hold for about 3 seconds, and then release.
A pull-down menu appears.
3.
Press Properties.
4.
On the Properties dialog box, press to select Internet Protocol Version 4 (TCP/IPv4).
5.
Press Properties.
TIP
You can also press Control Panel>Network and Internet>Network Connections to
access the same screen.
