26
Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019
Second Generation MobileView Tethered Operator Terminal
Reconnect Power to IP65 Junction Boxes
If the IP65 junction box is powered off, the relays of the emergency stop circuits are no longer
actively held closed and the emergency stop circuit is subsequently opened, which is comparable
to an activated E- stop.
When powered off, the input states and E-stop state at that time are saved in the IP65 junction
box memory. When power is restored, these saved states are subsequently retrieved.
Therefore, the IP65 junction box can have the following states.
Ethernet
Green
The junction box is connected to an Ethernet network.
No color
The junction box is not connected to an Ethernet network.
Status indicator
bar
(1)
Solid green
A second generation MobileView terminal with an E-stop button is connected correctly
and the E-stop has not been pressed.
Solid white
No second generation MobileView terminal is connected but a 22-pin bridge connector is
connected correctly.
Blinking white
No second generation MobileView terminal or 22-pin bridge connector is connected to the
junction box.
Solid yellow
Begins the disconnect count time of 10 seconds after a second generation MobileView
terminal or 22-pin bridge connector is disconnected from the junction box.
Partial yellow
Going from right to left, a light on the status bar shuts off after 1.67 seconds of disconnect
time has passed. For example, only three of the six lights remain lit after five seconds of
disconnect time.
Blinking yellow
When no plug is connected after 10 seconds, the disconnect timeout forces the junction
box into a safe mode.
Solid red
An E-stop button on a second generation MobileView terminal has been pressed and safe
mode is activated.
(1) The IP65 junction box must have power (green at power status indicator) for the status bar to display status.
ATTENTION:
Other colors signify when a second generation MobileView terminal or IP65 junction
box are in an error state. To identify these colors, see the Troubleshooting section in the
MobileView Tethered Operator Terminal User Manual, publication
.
State
Description
Normal
A second generation MobileView terminal (with an unactivated E-stop push button) is connected.
Table 2 - IP65 Junction Box Status Indicators and Bar Colors (Continued)
Indicator
Color Displayed
Status Indicated
