Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019
31
Second Generation MobileView Tethered Operator Terminal
Initial Configuration of the Windows Operating System
When a second generation MobileView 2711T terminal is powered up for the first time, several
setup messages appear:
• Setup is starting services
• Setup is installing devices
• Setup is applying system settings
• Setup will continue after restarting your computer
The terminal then reboots. After the start-up screen appears, another setup message appears:
• Setup is preparing your computer for first use
This message begins the Windows End User Setup procedure.
To configure the Windows operating system on the second generation MobileView 2711T
terminal, perform the following steps.
1.
Enter the appropriate information to the screen that prompts you to create an
administrator account and a computer name.
2.
After you add information, press Next.
IMPORTANT
Do not disconnect power from the second generation MobileView 2711T terminal until after
the Windows End User Setup procedure is completed.
If power is disconnected during this procedure, it can result in a corrupted system image.
IMPORTANT
When you touch a data field in a dialog box, an onscreen keyboard appears so that
you can type in your information. You can also connect and use an external keyboard
through the USB port on the back of the terminal.
Onscreen Keyboard