Rockwell Automation Publication 2711T-QS002C-EN-P - March 2019
15
Second Generation MobileView Tethered Operator Terminal
Temporarily Mount the IP65 Junction Box
Temporarily mount an IP65
junction box to its installed back
plate for the following:
• For hands-free wiring and
subsequent configuring of
2711T-JBIP65DC1, the
IP65 junction box with
cord grips
• For Box ID configuring
and brightness setting of
2711T-JBIP65DM1, the
IP65 junction box with
M12 On-Machine
connections
You can slide the IP65 junction box onto the longer screw bosses of the mounted back plate; no
screws are needed.
Wire the 2711T-JBIP65DC1 Junction Box
To wire the 2711T-JBIP65DC1 junction box, perform the following steps.
1.
See
to determine the appropriate cable outlets for the wires to be
installed.
2.
Remove the cable glands from the cable outlets at the bottom of the junction box that
you plan to use.
3.
With a small flat head screwdriver, remove the black plugs from the seal rings that you
plan to use.
SHOCK HAZARD:
When the back plate is removed, the circuit board inside the junction box is
sensitive to electrostatic discharge (ESD).
Use an antistatic wriststrap connected to the work surface, and properly grounded tools and
equipment.
IP65
Junction Box
Longer
Screw
Boss
Longer Screw Boss
Mounted
Back Plate
