Roche OMNI C, Instructions For Use Manual

Page: 108 / 152

6 Maintenance
6-14
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
6.6 Unscheduled
6.6.1 Cleaning the bottle compartment
• Open the bottle compartment cover. The bottle exchange image appears on the display
(see Fig. 8).
• Open the docking mechanisms and remove all bottles.
•
Clean the bottle compartment with a towel soaked in disinfectant (deproteinizer for
example).
• Re-insert the bottles (see section Using the empty C1 calibration solution 1 bottle as W
waste container, page 6- 11 and Installing the waste water container, page 6-11 ).
TIP: Do not scan a barcode!
• While in the "Analyzer" operating mode, press:
> System > Tools > Fluid actions > Auto preparation routines
• Select successively "Prepare Calibration Solution C1" and "Prepare Calibration Solution
C2".
Start the process with .
6.6.2 Cleaning the sample drip tray and wash plate
The sample drip tray and the wash plate are parts of the sample port module.
Handle these parts with care. Danger of injury!
Always wear gloves! Danger of infection!
While in the "Analyzer" operating mode, press:
> System > Wash and clean > Clean sample port module
Fig. 16
Sample drip tray
Wash plate