Roche OMNI C, Instructions For Use Manual

Page: 40 / 152

1 Introduction
1-32
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
• You can now remove the entire tube set (tube holder with tubes) (see Fig. 37).
Fig. 37
•
Close the tension lever (clear plastic cover).
8. Remove the electrodes
• Open the measuring chamber cover.
•
Open the locking lever.
Fig. 38
• Remove the electrodes.
• Close the locking lever and the measurement chamber cover.
9. Remove needle and fill port
• Open the flap to the labelled capillary position (completely open position).
• Rotate the fill port holder in the direction of the arrow (see the marking on the fill port
holder). It will come out of the axis and snap out of place (see Fig. 39/1)
CAUTION: Do not bend the needle!
• Carefully remove the fill port holder from the needle (see Fig. 39/2).
Remove the needle.
tension lever
linear clamp
pump head
locking lever